WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through April 21, 2006 (http://www.wakeworld.com/forum/forumdisplay.php?f=320404)
-   -   Newbie questions (http://www.wakeworld.com/forum/showthread.php?t=317635)

jpshaff01 04-16-2006 10:37 AM

So as stated before i got my first inboard. I have more questions of course. <BR> <BR>1. What should a do besides change the oil, impeller, plugs? <BR> <BR>2. do i have to buy a fake a lake to start it up or is there some other way? <BR> <BR>3. I saw grant post in another thread that you need a radial buffer for gelcoat. Did i read that correct or was it orbital? <BR> <BR>4. is there any way to get the color back in my teak, whats the best way to refinish it?

boarder_x 04-16-2006 3:35 PM

1) Along with oil, change the oil filter. The fuel filter, cap and rotor, and tranny fluid. <BR> <BR>2) For about $10 more than a "fake a lake," you can get a flush kit. <BR><a href="http://www.overtons.com/modperl/overtons/detail/pdetail2.cgi?r=detail_view&amp;item_num=25608&amp; fcat=2C2C" target="_blank">http://www.overtons.com/modperl/overtons/detail/pdetail2.cgi?r=detail_view&amp;item_num=25608&amp; fcat=2C2C</a> <BR>If you have a 1" input hose, you can use this one. <BR><a href="http://www.overtons.com/modperl/overtons/detail/pdetail2.cgi?r=detail_view&amp;item_num=25604&amp; fcat=2C2C" target="_blank">http://www.overtons.com/modperl/overtons/detail/pdetail2.cgi?r=detail_view&amp;item_num=25604&amp; fcat=2C2C</a> <BR> I don't have either, but I wish I did. Climbing under your boat, trying to hook up the "fake a lake," gets to really be a pain. <BR> <BR>3) No info. <BR> <BR>4) Just get some good quality teak oil. I hadn't touched mine in almost three years. I put some oil on it, and now it looks new. I used three coats The first one took a while, but then it was much better after that was done. <BR> <BR>Robb


All times are GMT -7. The time now is 8:35 AM.