WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through April 21, 2006 (http://www.wakeworld.com/forum/forumdisplay.php?f=320404)
-   -   2000 Centurion Elite V Hydraulic Wake Plate (http://www.wakeworld.com/forum/showthread.php?t=314424)

thebeav 04-06-2006 6:28 PM

I have 2000 Elite V and it currently has a manually adjustable wake plate\cavitation plate. I have been researching the bennett x-14 hydraulic wake tab, but have been told by a dealer that it cannot be installed? Any help would be appreciated. <BR> <BR>Thanks

krbaugh 04-06-2006 9:06 PM

my dealer has repalced the manual with a hydraulic. IT can be done but requires some fibergalass work. They dont mount the same so you end up with some extra holes in the boat<img src="http://www.wakeworld.com/MB/Discus/clipart/blush.gif" border=0>

thebeav 04-06-2006 9:09 PM

Thanks Kevin. Any chance you could post a couple of pics?

krbaugh 04-06-2006 9:13 PM

Sorry I dont have any before and after pictures if memory serves this is the boat that was changed <BR><a href="http://www.clarkboatmotor.com/detail.asp?product_id=FNEBused" target="_blank">http://www.clarkboatmotor.com/detail.asp?product_id=FNEBused</a> <BR> <BR>if you look a the bottom of the page there is a pictue

thebeav 04-06-2006 9:20 PM

That will work fine. In your opinion was it worth putting the plate on? I have an even split with skiers and boarders. 2 prefer skiing and 2 prefer boarding. If I had more $$$ I would get a newer boat, but this will have to do for now.

krbaugh 04-06-2006 9:26 PM

I would have never owned a Elite V/Huuricane/Lightning/Airwarrior with out the plate. The boat likes to porpuse when the plae is up so when wakeboarding you trim it up all the way when skiing or jusr going fast give it some trim. So yes it is worth it IMHO <img src="http://www.wakeworld.com/MB/Discus/clipart/wink.gif" border=0>

thebeav 04-06-2006 9:27 PM

Very helpful. Thanks again!

krbaugh 04-06-2006 9:28 PM

No problem it looks like you are from <BR> IP Address <BR> Reverse DNS slkcdslgw10poola210.slkc.uswest.net <BR> From / Via Usw-Interact99-2blk <BR> Origin Location Minnesota, USA. <BR> <BR>Who is your dealer? <BR>

thebeav 04-06-2006 9:31 PM

M&amp;M Watersports, Springville Utah. I sounded negative about the dealer but I think they were just playing it safe. Other than the wake plate, they have been great. By the way, on the picture of the link you sent me, was that a bennett trim tab (X14 Tab) as well?

krbaugh 04-06-2006 9:34 PM

Not sure what the number is Clarks just got it from Centurion <BR> <BR>M &amp; M is a great dealer!....they might be trying to incourage you to trade it in<img src="http://www.wakeworld.com/MB/Discus/clipart/wink.gif" border=0>

nar722 04-16-2006 10:45 PM

I have a 2001 elite v and had it installed afterwards. It was a bit pricey but worth every penny being able to automatically trim the boat and shape the wake a bit. It also gets rid of the porpoising especially when it is loaded down with ballast.

All times are GMT -7. The time now is 8:35 AM.