WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through March 15, 2006 (http://www.wakeworld.com/forum/forumdisplay.php?f=309006)
-   -   4 channel amp question (http://www.wakeworld.com/forum/showthread.php?t=305122)

cvnrides 03-07-2006 6:14 PM

I have a Kicker KX650.4 to power my tower speakers. The tower speakers are the Fusion combo set and run at 4ohms each set with one connection. If I run this amp in two channel bridged mode will I still get stereo effect?

tclagggym 03-07-2006 9:44 PM

Yes, bridging them just gives you more power to them.

tbonus 03-08-2006 3:44 PM

tim c: Bridging is combining the left and right channels to one channel and the end result is a single (mono) channel with twice the power. <BR> <BR>Vince: There is a way around this though depending on the kx650.4 inputs. Does it have 2 or 4 channel inputs? If 4, it can be done, just run your left side to 1 &amp; 2 and right side to 3 &amp; 4 out of the head unit and make sure the amp settings are properly selected. If 2, your amp must have a setting to have #1 input feed #1 &amp; 2 output and #2 input feed #3 &amp; 4 out.

tbonus 03-08-2006 4:01 PM

did some searching and came up with this: Your amp has an amp1 and amp 2. Run your head unit output left to amp 1 and run your head unit right side to amp 2. You will need 2 splitters for this.

cvnrides 03-08-2006 4:54 PM

Thanks T I'll give it a try as soon as i get some splitters.


All times are GMT -7. The time now is 4:07 PM.