WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 04, 2005 (http://www.wakeworld.com/forum/forumdisplay.php?f=227721)
-   -   Looking for some Flight Clips (http://www.wakeworld.com/forum/showthread.php?t=225911)

csquared 04-28-2005 10:05 AM

My old Wake Design board racks are looking pretty bad and now that I set up a new boat lift to tuck the boat up under a canopy, I am looking for a set of Flight Clips for my FCT so the board racks fold down with the top of the tower. <BR> <BR>Anyone have a set of Flight Clips they want to get rid of or have a line on a reasonable price for a set? Any other suggestions for racks that mount to the flat bar portion of the FCT?

polkaking27 04-28-2005 10:38 AM

two things for ya... I know a guy that is trying to sell his lightning racks (mount to the flat part on a fct) if you want his email. Next, would you want to sell the mounting hardware off your wakedesign racks... I just inherited a couple wd's and the mounting hardwar won't fit my tower.

csquared 04-28-2005 10:48 AM

If I can find a new set of racks, I would be happy to sell the hardware. Since the racks are missing some of the rubber inserts to protect the boards, the hardware is probably be the best part of the racks. <BR> <BR>Who makes the lightning racks?

kybool 04-28-2005 12:22 PM

If you register with planetnautique.com mid-ohio nautiques will give you a 15% discount on anything you need. I think the black flight clips are about $400 after the discount

csquared 04-28-2005 12:24 PM

Thanks Scott...I'll check into that.

polkaking27 04-28-2005 12:42 PM

Shawn, <BR> <BR>Lightning makes the racks... here is a pic of them. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/225949.jpg" alt="">

polkaking27 04-28-2005 12:42 PM

oh yea... let me know on that hardware... <BR> <BR>Is it the quick release hardward w/the cotter pin to hold them on

csquared 04-28-2005 1:38 PM

Very nice tower set up. After measuring my new canopy over my lift, I really need the lower profile of the flight clips. I ordered a set from MidOhio. With the discout, they were $395 for the full set. Pretty good deal considering most of the other set ups I looked at were $500 and up for the pair. <BR> <BR>The hardware on the WD racks is the quick release with the cotter pin. Are you just interested in the clamps? They are sized to fit the lower horizontal bar of the FCT (where the front of the bimini is attached in the picture above). Once I get the new racks (supposed to be two weeks), I will make sure I can get the old ones off. They haven't been moved in about 2 years. If the e-mail in your profile is good, I'll drop you a line.

polkaking27 04-28-2005 3:52 PM

Shawn <BR> <BR>yea, I just need the hardware. Good luck with the flight clips those are sweet racks. If you wanna drop me a line when you get those clips that would be great

All times are GMT -7. The time now is 1:58 PM.