WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through March 15, 2005 (http://www.wakeworld.com/forum/forumdisplay.php?f=218303)
-   -   width of Skylon Swoop tower (ID) (http://www.wakeworld.com/forum/showthread.php?t=215586)

whitechocolate 03-05-2005 7:57 PM

If someone with a newer Wakesetter VLX with a Skylon Tower could measure the inside dimension (ID)of the tower at the top this would be much appreciated and would help me get started faster and start posting pictures. Also I need the spacing on the 4 bars that go across the tower up top. Thanks to anyone that can help me out. Clay-DOGGY <BR> <BR>

buzz_grande 03-06-2005 6:25 PM

I will try and check mine tomorrow AM.

whitechocolate 03-06-2005 9:01 PM

Thank's Buzz'

buzz_grande 03-07-2005 9:02 PM

Sorry I took so long to get back. Here's what I got. <BR> <BR>The front section of the tower is roughly 62" wide. The rear is 68" wide. That is a couple inches down from the curve at the top. Inside diameter, BTW. The distance between the front and back cross pieces is 7 3/4", and between the two connecting pieces (with the thumbscrews) is 21 1/2". <BR> <BR>Hope this makes sense. Pics should show what I measured. Let me know of you wanted something more specific. <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/216064.jpg" alt="tower"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/216065.jpg" alt="tower">

sculpter 03-08-2005 12:39 AM


whitechocolate 03-08-2005 9:43 AM

Yes, Thanks BUZZ. We will post some photos of the project, <BR> <BR>BTW how do you like the Nutrix Connector's, Waht speakers are you using?

buzz_grande 03-08-2005 7:54 PM

Only had them for a week. So far they are great. They came with my Defcon 4's.

All times are GMT -7. The time now is 11:43 PM.