WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through July 28, 2004 (http://www.wakeworld.com/forum/forumdisplay.php?f=182262)
-   -   Binding and board conflict? (http://www.wakeworld.com/forum/showthread.php?t=181102)

jeebus 07-24-2004 5:15 PM

Are there any boards and bindings that don't fit together well that I should know of before I buy? <BR>It would be a pain to get new screws.

jeebus 07-25-2004 11:33 AM

bump

puckinshat 07-25-2004 2:53 PM

The wakeboard industry has stanardized screw size, so they should all fit as far as thread and diameter. Length is another issue. I hear LF screws are too short for hyperlite boards but my buddy has a parks board and 04 Exos and has yet to have any problems. Just make sure they are tight and tighten them up between sets

phaturn 07-25-2004 3:57 PM

Yes! I just got the liquid force alphas and the screws were to short for my Premier. I had to send my buddy to the hardware store and five minutes later.....PROBLEM FIXED!

coffindancer 07-25-2004 4:12 PM

did they also standardize the screws for the fins? Will rainbow or hyperlite fins work on all boards? <BR>


All times are GMT -7. The time now is 8:13 PM.