WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through May 05, 2004 (http://www.wakeworld.com/forum/forumdisplay.php?f=169818)
-   -   Who makes custom hard tanks for ballast?? (http://www.wakeworld.com/forum/showthread.php?t=168916)

jarrod 05-04-2004 3:29 PM

we installed a ballast system and now we're interested in switching from bags to hard tanks. Can anyone offer some direction?

thane_dogg 05-04-2004 3:41 PM

<a href="http://www.ronco-plastics.com" target="_blank">www.ronco-plastics.com</a> <BR> <BR>I don't know, it's a start.

tahoe 05-04-2004 4:22 PM

I seen some in the Overtons Catalog. Imco also makes custom aluminum tanks.

holbywan 05-05-2004 12:39 AM

<a href="http://www.tank-depot.com/dept/68/" target="_blank">http://www.tank-depot.com/dept/68/</a> <BR> <BR>A couple of things to think about when purchasing these tanks: <BR> <BR>1. Ask for a completely sealed tank and get a fitting relocation kit <BR>for each tank. This way you can customize it once you get it. It <BR>worked out great for me plus you can get your hand in there to adjust stuff <BR>just in case. <BR> <BR>2. Measure you area at LEAST two times before ordering! I measured <BR>twice and had Dave measure twice. Could be an expensive mistake. <BR> <BR>3. Error on the side of too much weight if you've got the room. After <BR>all, you don't have to load them all the way up. <BR> <BR>4. Call them on the phone, don't order on the web to make sure you get <BR>what you want. <BR> <BR>Good luck! <BR> <BR> <BR>

All times are GMT -7. The time now is 11:51 PM.