WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Trick Tips (http://www.wakeworld.com/forum/forumdisplay.php?f=3184)
-   -   hitting a rail (http://www.wakeworld.com/forum/showthread.php?t=102220)

wannagowakin 03-06-2004 6:45 PM

can i pleeze have some tips on hitting rails

wakehype 03-07-2004 12:31 AM

well, if it has a slide-up onto it, DEFINATLY TAKE IT, do not try to ollie up onto it your first time. also, whatever you do, KEEP YOUR KNEES BENT. iv seen so many peoople have stiff-leggs and get rocked

wakehype 03-07-2004 12:33 AM

wake i mean by slide-up like on thoes inflatable ones they have rail goin up it and down the other end. picture an a-frame. However, if you dont have one, good luck and wear a helment <img src="http://www.wakeworld.com/MB/Discus/clipart/wink.gif" border=0>

wannagowakin 03-07-2004 3:26 PM

i am mking an up to flat and i got a got a helmet for my b-day, thanks for the advice, also, i lean more centered/ forward right

obrienride16 03-08-2004 9:49 PM

if its not too high, ride about 1/2 way past the rail, then ollie onto it and just slide the last 5 feet or so. that is usually the easiest way to do it. as you get comfortable, get on the rail earlier and slide more of it.

wakehype 03-08-2004 11:39 PM

i dunno, i always found it easier to slide up it then get off whenever rather than ollie my first time. Personal opinion , tho

03-09-2004 8:39 AM

I have a question... I'd like to try and start hitting the sliders at TSR. Should I take the fins off, even though I'm not going to be doing 50-50 slide? Maybe so it's easier to slide off one way or the other if I want out early.

wakehype 03-09-2004 10:49 AM

id definatly take my fins off

aussie_stu 03-09-2004 3:39 PM

connor stay centred too man, if you lean back it will be real nasty, so just stay centred and low.

wannagowakin 03-10-2004 5:04 PM

thanx, keep the tips coming pleeze

03-10-2004 6:31 PM

I know it doesn't answer your question, but how much easier is it to break your board on a rail? My friend broke his on a rail and Liquid Force refused to replace it under the warranty. I have never done a rail b/c I don't wanna break my board. It took a long time for me to save up all that money.


All times are GMT -7. The time now is 9:57 AM.