Has anyone added additional ballast lines on a pre-existing moomba system?
I want to install a line to the bow of my boat. I have the Gravity III setup and It looks like If I can get another sprinkler valve to add to the pre-existing 3 I could just run another line of the same pump and just run the valve switch to the dash? Has anyone done this and could give me some advice? lol
Thanks, -Adam |
If your wanting to add another line for and integrated bow sac then here's how I did it.
Way easier then another solenoid and hose. With pump sac and fittings I was just under $220. Same boat, so the write-up should be very helpful. http://moomba.com/msgboard/showthread.php?t=11410 |
All times are GMT -7. The time now is 8:18 PM. |