Nautique with Z5 and Wetsounds
 

Just wondering if anyone has done wetsounds on a 2012 210 with the Z5. Which speakers will fit on the tower with this setup, if any? Thanks for the help

I'm interested in knowing this as well. I emailed Wetsounds a few weeks ago asking if there are any plans to make a factory adapter mount to work with the new Nautique towers...no answer yet.

The current OEM speaker mounts are very well done and reduce the hand height significantly over a traditional clamp. Our 2012 210 has the factory Roswell horns on it now and I would likely swap them for Wetsounds if I could make it work with the Z5.

Call them.

Aaron, sorry if we missed your email. Please check your spam folder, sometimes our emails go there. Must be the Wet Sounds name. Lol

Yes we have brand new billet adapters for the new tower. You can see them on our Facebook page, they will be on our site soon. We have adapters for the top mount and the side mounts. You can install REV 8X or REV 10X for a direct mount. Or you can also install REV 8SC or REV 10SC swivel clamps with the base plates direct mount or full swivel and quick disconnect.

All should work with the Z5 as they are in the factory locations. ( not 100% sure how the REV 10 will clear but should) we will do some testing here to check.

Tim
Wet Sounds

Awesome. Thanks Tim for the reply!

That helps thanks

Hooray! this pleases me knowing my next boat will be able to accommodate my dream sound system along with the Z 5!