Does anyone out there know if it is possible to place extra board racks/clips on the SAN tower? Where would they go? Could you post pics please... How do you like them, etc....
|
I've seen on a boss ad some board racks mounted on the grab rails mounted back by the engine bay. Looked sweet and would be really convienent to get the boards out. Not sure if you could still open the storage compartments with the racks full.
|
stefani, we mounted a set of <a href="http://www.mako.com" target="_blank">www.mako.com</a> racks on the lower back tower leg. and we have flight clips on the top... looks like it will work great.. can't try it for a few weeks thow..
|
stefani, we mounted a set of <a href="http://www.mako.com" target="_blank">www.mako.com</a> racks on the lower back tower leg. and we have flight clips on the top... looks like it will work great.. can't try it for a few weeks thow..
|
check out the Nvert racks. They worked working directly with CC on the develpment of the new rack for that specific tower <BR> <BR><a href="http://www.nvertsports.com/" target="_blank">http://www.nvertsports.com/</a> <BR> <BR>good luck =) <BR> <BR> <BR>
|
those look great - what's the price?
|
Prior to the introduction of flight clips, I saw a lot of boats with racks mounted to the lower round bar where the "Flight Control Tower" logo is. <BR> <BR>I belive it is 1 7/8" diameter. There are LOTS of racks that will mount on a 1 7/8" bar. If you used this location, all of your boards would sit parallel to each other. <BR> <BR>You may want to consider buying all of your racks from the same manufacturer to maintain a consistent "look".
|
They used to have a photo of the new CC rack on the main page, before the newest update. They do have that modeL, Wes, Stef, e-mail me, I should be able to get a set for you to take a closer look at if intrested. . . <BR> <BR>FYI: We will be raffling off a pair of Nvert racks at every GoWakin event this year! <BR> <BR>Aaron
|
Hi, thanks everyone. I would consider placing the extra board racks on the lower tower bar but was concerned it may obstruct the view of the driver. Anyone have first hand experience with this? <BR> <BR>Any pics? <BR> <BR>Thanks again all:-)
|
I have racks only on the lower bar of the FCT and they aren't in the way at all. You can see them in my profile pic (they are wake design racks. Not as pretty as some of the others, but so far they are getting the job done with no problems). <BR> <BR>I'm still looking for a good set of racks for the upper bar. The Nvert racks LOOK nice but I still haven't seen any pictures of them on a FCT, especially with the tower folded.
|
Shawn, that's perfect. That's exactly what I wanted to see:-) <BR> <BR>Aaron: thanks, I'll email you soon. <BR> <BR>Thanks everyone! <img src="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" border=0>
|
All times are GMT -7. The time now is 4:46 PM. |