just wondering i bought a pair of skylon rubicon 350's and am wondering is it best to wire them in at two ohm, or 4 ohm. I have a alpine pdx 4.150 <BR>150 watts rms at each channel running at two ohm or 4 ohm or so stated on box. thanks
|
Get a new amp... <BR> <BR>Looking at Skylon's website, your speakers are 3 ohm each. So with your amp, I would run one speaker bridged to channel 1+2 and the other speaker to channels 3+4 <BR>Mono the inputs.
|
With your speakers wired bridged mono, the amp is 300 watts x2. That is plenty of power. Check with Alpine to make sure the amp will run stable below a 4 ohm load.
|
All times are GMT -7. The time now is 2:53 AM. |