Any advice on upgrading my ballast system? I'm wanting to add another bag in another location and using an over the boat pump is just getting old, I want to automate. I'm planning to use quick connects so I can remove the bags and whatnot. Would it be better to go with multiple aerators, or get a reversable pump like the jabsco one or something?

I love the tsunomi pumps, cheap, easy to install and I don't seem to have a problem with them. What kind of ballast are working with now?

Ben, <BR>Should be a pretty easy install in your LSV. I think you will like the price of a 2 tsunami pump system. Unless your boat is a 2009 go with the aerators. <BR> <BR><a href="mailto:Spencer@wakemakers.com">Spencer@wakem akers.com</a>

it's a moomba lsv. I want to add pumps for an integrated bow sac. Where do I get fittings for the water intake?

Are you going to drill and add another thru-hull stainer or just "T" off the existing thru-hull?

<a href="http://www.marinehardware.com" target="_blank">www.marinehardware.com</a>

What is best, T off the existing thru-hull or add another thru-hall strainer? Would adding another port speed up the fill times?

I don't think the fill times will change which ever way you go if you are only adding one more fill pump. I say "t" off that thru-hull and add another fill pump. Are you going to add another switch or piggyback off of the center tank switch?

I'm gonna wire into the extra accessory switch on the dash with the bilge/blower/stereo array that's completely unused right now.