Slingshot board and Ronix bindings?
 

Will the new SS boards work with the 09 and up Ronix bindings? Seems like it would be ok if you could figure out how to get the Ronix serrated washer under the SS binding posts.

yup...the serated piece seperates from the ronix thumb screw thing and slides over the SS studs..
I have had reflectos, reliks and parks on my recoil

Agreed. I have '10 Kais on my '12 Recoil.

I have '10 Ones on my '09 Response. I add an extra washer to the screws to allow me to tighten the screw all the way. Otherwise, the screw bottoms out before the boot is tight to the board.