Does anyone have any advice on a good way to break in my ultra suctions? I have used them enough for them to be broke in but they dont seem to be breaking in. They hurt to wear them , i have the right size,,, its just aggrevating trying to get these things off and on. Any help would be appreciated, later <BR> <BR>

i got the 04 ultra's and had the exact same problem. here's what to do: <BR> <BR>get a big pot of petroleum jelly/vaseline <BR>rub it all over the inside of the bindings <BR>put a gatorade bottle in each binding <BR>leave for 3 days <BR>rub in more vaseline <BR>wear around the house whenever possible <BR>put in gatorade bottles overnight <BR> <BR>do this for about 2 weeks and they feel dandy <img src="http://www.wakeworld.com/MB/Discus/clipart/biggrin.gif" border=0> <BR> <BR>hehehehhe <BR> <BR>John

Here's what you do: <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/171040.jpg" alt="">

what exactly DID you do J-rod?

Wow never seen that done before. How does it work? what were the cost of the parks overlays?

oooh are you serious? parks overlays on ultras? wow... interesting concept, how do they ride? <BR> <BR>(Message edited by devastate on May 19, 2004)

I had 02 Parks that were trashed with new overlays. Then I bought Ultra which I ended up hating because I couldn't get them off. It was as simple as 'remove the Ultra wraps and screw on the Parks overlays'. Only had to drill a few new holes in the rubber. All of the inners are still Ultrasucs. The Parks overlay just lets you get in and out easier. But, they ride just like the Ultras.