Tachometer keeps quitting...
Is there some place to checking wiring or suggestions?
Thanks |
Check connections on the back of the tach. Wiggle the wires and see if it goes on and off, if so you have a bad connection or a break in a wire. If you're sure the tach has good power and ground, then check your signal wire to the coil or just run a new one (can do a temporary wire to test).
|
i'll give that a try.
thanks |
The tach gets 3 wires.....ign power, ground, and signal.
Signal goes from the distributor if older....computer if newer. What year, make, model, motor? |
2001 sanger v210
|
Isn't there a module behind the dash that can be suspect, and costly?
|
i believe so but what makes it suspect is that it is intermittent.
|
All times are GMT -7. The time now is 9:04 PM. |