Labled Rocker Switches Bow, Port, Starboard.........anyone still make em?
 

Redid my system a little and just wondering if anyone knows were I can find the switch plate covers with the designations on them or ideas on how to cable them and have it not look ghettofied with white out. :)

Check Bakesonline.com....................They seem to have everything I need.

Good luck

Paul at bakes has all of the Malibu curved covers in stock. We just got a new line of the straight covers in this week. We will have them up next week. HAHA. Not sure why the picture is up side down.

spencer any chance you have a spst cover like that labeled "stereo" or "music" or "tunes" or somethin?

Wakemakers and EBay is a good source

Spence your killing me. I just put on an order for a ballast kit IBS style with Johnson pump. I asked about week and half ago when I did my order.......DAUM! should have waited a week :) Kit's installed.......... piece of cake......Just need the rocker covers for a finishing touch.

Thanks for the replies guys

We didn't do any other switch actuators besides the 3 ballast specific covers. You can get the "Stereo" cover from your local Supra and Moomba dealer. I ordered a couple from Active Water Sports. Contact Brian in service. 503.650.5991

No need to worry. We are selling the covers separately. We probably won't sell them on switches. It will be an add on for our customers that have already installed systems over the last couple years.

I would like these but need a 4th "bow ballast" cover too

Pacergroup has the Carling Contura actuator series - just ordered a few there
http://www.pacergroup.net/Categories...ened_Actuators

and if you need the actual switches
http://www.searay-parts.com/SearchRe...=rocker+switch

if one ever goes out

you can try Great Skipper. Sometimes they have labeled switches.

http://greatlakesskipper.com/categor...-supplies.html

Specifically, I'm looking for a contura v audio/stereo/music cover.

dont know how close this one is

http://greatlakesskipper.com/product...tch-cover.html

The switch covers are finally available. Sorry for the delay.

http://www.wakemakers.com/wakeboard-...ne-electronics

I got all of my covers (and switches) from Bakes; matched my stock curved covers.

HAHA. Yeah we only have straight MasterCraft, Supra, Moomba, and Tige style covers. If you need the curved Malibu OEM style covers call Paul at bakes. Should have clarified that.

Found these guys in cupertino ca
http://www.otrattw.com/index.php

This one is my favorite
http://www.otrattw.com/prodimages/BEER.jpg

and this one
http://www.otrattw.com/prodimages/PASS5.jpg

Those are awesome. I needed a mindless project for the fall - may have to replace all mine just to have the passenger eject and the sasquatch light switches