I just got some of "Raul's" clamps to use on a 3/4" baltic birch tower box. The bolt that attaches the clamp to the enclosure is too short for my box. They appear to be metric M10-1.5 socket bolts, made from A2-70 stainless steel. I need at least a 30mm length, and want to buy 6 of them. <BR> <BR>I've emailed Rio at PMM but haven't heard back from him yet. I checked Home Depot but couldn't find anything similar. I found BoltDepot.com but they want $10 just for shipping: <BR><a href="http://www.boltdepot.com/product.aspx?cc=25&amp;cs=81&amp;cm=19&amp;cd=1319 " target="_blank">http://www.boltdepot.com/product.aspx?cc=25&amp;cs=81&amp;cm=19&amp;cd=1319 </a> <BR> <BR>Do local hardware stores carry bolts like this? Is there a cheaper online source?

Check out <a href="http://www.McMaster.com" target="_blank">www.McMaster.com</a> which is where we buy lots of hardware in low volume, and Ace has a decent selection of stainless metric bolts.

It's a very common metric thread, look at a few different hardware stores not all carry metric stainless allen hardware. <BR> <BR>Try this: <BR>Daytona Bolt &amp; Nut Co (321) 254-6535