RAD Liners in Ronix Bindings???
 

Does anybody know if Slingshot's RAD liners fit in Ronix Bindings? Looking to replace my old and worn cell liners from my ronix cell bindings.

I would probably go with a no. You might be able to get them in, but the shape would be different and you would likely slide around a lot, get pressure points, or jam your toes a lot.

Exactly. Ronix's newer liners are lasted to fit the last of the outer shell, and I imagine Slingshot uses a similar process. This idea would work, but it's asking for trouble in the form of discomfort.

Why not call Ronix and see if they sell replacements.

didn't think Ronix liners removed easily like slingshot anyway.

The new ones dont for sure.

The liners in my LF Harleys come out pretty easily, which can actually be quite annoying.

just have to take the 2 screws out of the bottom and yank them out. I do it to wash them when they get too smelly. :)

What year are your Cells? Because my 09 Reliks have the tongue of the liner and outer firmly attached to each other.

I have Ones... are they made differently?... I just assumed they were made the same

The liners in my 2010 One's were simple to replace. All you have to do is remove the 2 screws on the bottom of the sole and pull them out. Send an email to Ronix to see if they can get you some replacement liners.

I've got a pair of 09 and 10... thier both the same.

Your not looking for a new pair of bindings are you Ben? I've got a pair of 2010 hyperlite team closed toes that have never seen the water. size 10

just letting yall know that if you email ronix they will sell you replacement liners for any make of binding they sell

how much?

That's what I was wondering.

I believe they said it was either $70 or $80 bucks for a set. You just have to email them.

That's not bad at all.

that's what I was thinking.