Do any of you Mastercraft X-10 or Maristar 210vrs owners have Perfect pass? If so where is the new paddlewheel located? Any help would be greatly appreciated. <BR>
|
On my 2004 X10 it's located just forward of the drain plug in the center of boat. You can reach it through the center hatch.
|
Barry, <BR> <BR>Does it pretty much work without a glitch at that location? And is it slightly of to one side or is there a flat on the centerline? Thank you so much for the info!!!
|
I don't think the stock location is very good. When you go over wakes I see my PP get confused--the speed reading goes up and down fast and the PP tries to adjust the throttle to maintain the speed reading even though the actual speed is pretty constant. I would suggest a little further back, if it is possible.
|
<a href="http://www.mymastercraft.com/forum/viewtopic.php?t=19&postdays=0&postorder=as c&start=0" target="_blank">http://www.mymastercraft.com/forum/viewtopic.php?t=19&postdays=0&postorder=as c&start=0</a> <BR> <BR>Half way down you will find the referrence to the X10 issues with paddle wheel location.
|
I have thrown out several inquiries, and once I find out the proper location I'll post some pics. Thanks for all the advice thus far!!
|
PP will tell you exactly where their engineers suggest putting it. Give Randy at PP a call and he'll get you in touch with an engineer who will give you the best spot.
|
My X10 was built in April and the paddlewheel was mounted forward of the center drain. The boat is so new that I've only taken it out once...no boarding...and I noticed that there were times when the PP gauge wouldn't show the speed at all. When I got home I cleaned the paddlewheel assembly, figuring that was the likely culprit. Now I wonder if I was seeing a syptom of poor paddlewheel placement.
|
This link should help. <BR><a href="http://mymastercraft.com/forum/viewtopic.php?t=85" target="_blank">http://mymastercraft.com/forum/viewtopic.php?t=85</a> <BR>
|
Here are a few photo's of the location that looks like it will work best for my boat. Let me know if anyone see's any potential problems. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/175025.jpg" alt="Paddlewheel Location">
|
<img src="http://www.wakeworld.com/MB/Discus/messages/65921/175028.jpg" alt="Paddlewheel Location ">
|
All times are GMT -7. The time now is 8:30 PM. |