Morse/Teleflex Throttle part for 97 Sanger
 

I have the stock morse/teleflex control in a 97 Sanger V210, and the throttle lever wont lock in neutral anymore. The small metal tab that locks it in place has worn down and needs to be replaced. I'm just starting to look and call around to find a part number so I can get a new one, but I thought I'd see if anyone on here had dealt with this issue or knew where to find these parts. Unfortunately I don't know the model number of the control, but it was the stock one. If anyone knows a model number on it that would be helpful too.

maybe this one???

http://www.downloadingfiles.co.uk/te...V-3%20Rev1.pdf

you boat most likely came with the MV2 control, which has been superceded by the MV3. It might be easier just to replace the entire piece. http://skidim.com/products.asp?dept=1122

Thanks guys, that gives me something to go with. I was having trouble even finding the model number of the control. I may end up replacing the whole thing, but I'm gonna search a bit first. Thanks again.