Anyone have a guide / video on how to change a 2012 PCM HO303 Impeller ?
Cant find anything on the internet, and PCM manual is super vague, doesn't go into details at all.
I have changed many impellers on Indmars & Volvo Penta, but it seems a lot more complex with PCM. Engine: PCM HO-303 Boat: 2012 Tige R20 |
Also my maintenance / red warning light turned on this weekend, anyone know how how to check what error it gives without having to take it to the dealer ? (what device to buy that reads codes on boats )
|
Find water pump. Take cover off. Remove old impeller. Replace with new.
Just kidding. Sort of. On a serious note, you'll probably get a better response on the Tige forums. Or Planet Nautique. Nauti uses PCM I think... |
1 Attachment(s)
May not be exact but this is probably close enough. This is the for the PCM 343 ex
|
Thanks bcrider, thats the exact setup as mine, may I ask what manual is that, and if it is downloadable ?
|
|
I changed mine this summer, piece of cake. The manual doesn’t give you any specific instruction for changing them. That diagram above is all you’ll need.
http://www.manualslib.com/manual/825...page=49#manual • Use a wrench to turn the belt tensioner and remove the belt. • Find the 3 bolts inside the water pump housing and use a socket wrench to remove them (I can’t remember what size or type, maybe 10mm?) • Remove water pump housing • Remove impeller behind housing. Note the direction of rotation. I used a needle nose pliers to remove mine, not too hard. • Place new impeller and put everything back together I think that’s it! |
awesome, thanks a lot !
|
All times are GMT -7. The time now is 10:06 PM. |