Bracing divider between locker and engine
I got my 1100lb sacs for the v-drive locker in my Moomba XLV. Just wondering how everyone is bracing up the divider wall to prevent any issues with these huge sacs. Pics would be nice if you can get them.
|
Personaly I found some 1"x1" stainless steel tubing cut it to length and thru bolted it to the wall. works great. I have seen others use aluminum L metal found at H.D. or lowes. three pieces should be enough.
|
Running the braces vertically right?
|
correct! make them as long as you can and still get the divider out.
|
1 7/8" aluminum strut mounted to the floor,the divider slips inside of it,L brackets on the sides.
|
All times are GMT -7. The time now is 9:32 AM. |