Just finished this bad boy. Took me about 8 hours to totally finish it. I made it so I didn't have to drill any holes in my boards and so I can use them again in the summer. Let me know what you think. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/387276.jpg" alt="Upload"><img src="http://www.wakeworld.com/MB/Discus/messages/65919/387277.jpg" alt="Upload"><img src="http://www.wakeworld.com/MB/Discus/messages/65919/387278.jpg" alt="Upload"><img src="http://www.wakeworld.com/MB/Discus/messages/65919/387279.jpg" alt="Upload"><img src="http://www.wakeworld.com/MB/Discus/messages/65919/387280.jpg" alt="Upload"><img src="http://www.wakeworld.com/MB/Discus/messages/65919/387281.jpg" alt="Upload">
|
nice work!!! I like how you made it so it shows off your new gear without jacking up you decks.
|
sweet, how much to make one?
|
it only cost me about 30 bucks for the wood. I had some left over wood stain so that didn't cost me anything. It was really easy to make, but I have a lot of wood working tools so that made it even easier. My buddy already wants me to make one for him...
|
Wouldn't it be more comfortable with the supports for the back rest BEHIND the back rest?
|
Hey man where are you from???<img src="http://www.wakeworld.com/MB/Discus/clipart/rofl.gif" border=0> But seriously I want one, just dont tell jesse that I am gonna use her board...
|
Nice. I like how the graphic on the Roam kind of goes along with the wood and the 'natural' theme
|
the supports are only about an inch thick so you really don't feel it on your back. And if i put it the reverse way, the roam has a wicked rocker so it would stick out way too far in the middle and go way to far out on the sides.
|
All times are GMT -7. The time now is 10:24 AM. |