Supreme v226 2013 Fat sac setup
 

Hi, i just bought my first surf boat and i was wondering if some one can help me with the fat sac setup. For the moment i do full rear left ballast + a 400lbs in the rear left compartment + a 400lbs fat sac on the left side bench + center ballast full. is there any better set-up then that ?

Thanks

Stock ballast full an 1100 in the rear and a 600 under the port side seat

are they still selling them as "Surf Boats" with 750 total ballast ?

T Hey have around 2000lbs of stock ballast! Thanks Harold I ll te this!

that's cool and a ton better than the 750 my 2011 had in it

You should buy à 2013 or à 2014 in that case ;)

LOL, old timers on here know why

Add a sac in the bow as well. It will make the wave longer and push more

Every Supreme v226 built from day one through 2013 has 1200 lbs of factory hard tanks, 350 in each rear corner and a 500 lb center tank. Like H said, 1100's in the rear compartments and a 400-600 under the port bench and bam!

Wrong Travis! I have a 2009 V226 and i don't have front 500lb in the front. The switch is on the dashboard but there is no center tank. Pierre-Hugues, Bon achat! j'adore mon 2009 donc ton 2013 doit être l'enfer... Enjoy

I Don't speak French but I just sold a 2003 Supreme V220 SP with the Sky package. It had the rear hard tanks and a switch for the center too but no tank. Made sure the new V226 had one before I bought this time. I use the factory center with custom Enzo style rear sacs that fill the lockers and under the side benches. 1100lb + per side. I will dial it in this spring.