Can anybody recommend a good brand of tonneau or full boat cover that snaps on? Boat is a 2002 Supra Launch. <BR> <BR>Thanks.

I would recommend you don't do the snap ons that require drilling the boat. It's too permanent.

west coast canvas. they are at tower park on the delta. I just had a cockpit cover made for my MB. yes the snaps are drilled into the hull but having you boat fully covered when trailering or leaving it in the water is well worth a couple of snaps on your boat. <BR> <BR>Phillip

why dont' you get a pull on cover..i had a snap on cover on my old xstar but i love the new pull on cover on my new xstar..it is faster and you can leave it on to tow with it or put it on when your boat is on the water! personally i hated the snap on covers

I had a snap on tonneau and bow cover made from Sunbrella material for my boat, it is pretty much industry standard and works very well.

I like the snap on covers because you can leave the bow cover on if you want. I have the pull on cover for my X-star and it takes two people to pull or drag it on. I feel a snap on cover is faster and I have driven with a snap on before. Its just your own preference.

I have a Truxedo on my Z71... I wouldn't have purchased one but it came on my truck already and I've really grown to love it! It velcros on the side and the bars attached using clamps on the underside bedrails... Its nice because I can roll it up and away when I need to use the bed... It even has a great warranty and if it gets to looking not shiny a little 303 brings it right up!

wow I'm asleep! I wasn't even paying attention, thought you were asking about truck stuff! <BR> <BR>Rookie Move!<img src="http://www.wakeworld.com/MB/Discus/clipart/uhoh.gif" border=0>