i am getting my ronix ones in the mail today or tomorow (wakeside.com) <BR>i want to get them molded to my feet but i dont have any wake shops around here <BR>but i do have a ski/snowboard shop that molds boots <BR>they have the one for ski boots and the normal one for snowboard boots (i think its made by 32 boots) <BR>it would be great if you could tell my how hot? how long? and if i put the sock back in the boot and put my foot in it and tighten it. etc <BR>if you have any other advice that would be great <BR>thanks so much for your help <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0>

Mine were perfectly comfortable right out of the box. I would just get your bathtub as hot as you can, let them soak for about 3 minutes then strap in to them.

thanks but i have just heard that everyone thought they were so comfortable but then they got them molded and they were so much better <BR>and since i have the option of a snowobard boot heater i think i will take it <BR>if it doesnt work out ill just us the tub thing <BR>and do you put your feet in them while they are in the tub or out <BR>thanks

not sure hot, but did mine for about 15 minutes, put the sock on your foot, get the boot hot, slip your foot in with sock on, sit there take, the boot off, take the sock off

what sock <BR>do you think my normal snowboard shop will have it <BR>is it just like a normal snowboard boot? <BR> <BR>thanks

118-119 Deg. is the standard temp. I would think 10-15 min should be fine.

The Ronix website says to heat them to 140 degrees before molding to your foot.

thanks derek <BR>i accualy found just found that after a google search