V215 interior removal
 

This weekend I'll be removing the sub box that came with my boat that is placed in the observer locker. And replacing it with a good size, built to spec box for a single 12, and locating another 12 beneath the helm.

But to do so, I need to remove the port side seating. Does the interior in this boat come out in 1 piece? Or are the port/rear/starboard seating 3 pieces?

Side panels have to be removed first then the back seat can be removed. Finally the seat base can be removed. The base is all 1 piece big horseshoe shaped fiberglass piece. Be prepared for this to take awhile reaching behind all the side panels to remove all the nuts and washers will take awhile 7/16 deep socket and a 7/16 ratcheting box wrench are your friend.