WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Archive through August 06, 2007 (http://www.wakeworld.com/forum/forumdisplay.php?f=487398)
-   -   Monster Tower Install (http://www.wakeworld.com/forum/showthread.php?t=474162)

puckinshat 07-11-2007 8:32 PM

I am getting my monster tower delivered tomorrow (only took me 2 years to pull the trigger on the purchase). Have any of you installed these yourself and if so, how long did it take? I am trying to time my weekend and am debating on trying to install it tomorrow after work. I am very good with tools and was an engineering student in college for a few years, so I'm not concerned with the install. If I get it half done, is it a big deal to stop in the middle? How much help should I have? Any tips for install? Any help would be much appreciated, I will post pics when I'm done.

sinkoumn 07-11-2007 8:40 PM

I installed mine. Took about four hours (in reality is was about 2 hours of actual work). You should at least have another person help you, but buy a case of beer and invite three people over and it will go much easier.

hixsonaz 07-11-2007 8:47 PM

yep it took me a half day...had to figure out the best position by mocking it up and taking digital pics and then i decided to reinforce the brackets in the rear with wood/fiberglass and put some extra fiberglass in front. Surprisingly no screw ups! Instructions are very detailed. Preview instructions online tonight. Read several times.

attila916 07-11-2007 9:59 PM

Get yourself some good drill bits, you are going to need them!

07-11-2007 11:07 PM

took me and a few friends half a day. we didnt work too hard, and it was pretty simple.

nbeihl 07-12-2007 1:22 AM

Half of a day if you are drinking beer. Make sure you drill the holes before you dig into the 24 pack! ALso, make sure you use tape when drilling the holes. If you do not know what I mean, just ask and I will explain.

walt 07-12-2007 5:19 AM

I've done four of them and they all took 2-1/2 to 3 hours.

olskooltige 07-12-2007 6:49 AM

Did mine solo in about 3 hours. I had to solicit the help of a neighbor to tighten while I was in the dry storage holding backup.

fast351 07-13-2007 12:11 PM

4 1/2 hours by myself. Biggest pain was scraping all the damn spray foam from under the gunwale. If it wasn't for that it would have been about 2.5 hours. Their instructions are the best I've ever seen for a marine product.

scottman 07-25-2007 6:17 PM

Solo in about 3 hours. Drill backwards and make sure you check the thickness of your fiberglass so you don't develop cracks later.


All times are GMT -7. The time now is 4:35 PM.