Wetsounds XS-650's Install in 2007 SAN
Hey folks,
Looking at purchasing and installing some Wetsounds XS-650's and wanted to know if these will drop directly in where the Polks are, or will they require some cutting? If any of you have installed these in a SAN would love to hear your input. Thanks! |
Justin,
The Polk MOMO is a bit undersized as a 6.5" versus the present Polk MM series. By comparison I would call the MOMO a 6" if I was getting technical. Most 6.5" coaxials are 6.875" grill O.D. and the Wetsounds XS-650 spec is 6.8" so just a 16th under the average. If I recall correctly, if some of your Nautique speakers are recessed into the vinyl bolsters then most any and all 6.5" can be a very,very snug fit but will usually go without any mod to the bolster and without chaffing the vinyl on the way in. David Earmark Marine |
Thank you David -much appreciated!
|
All times are GMT -7. The time now is 1:28 AM. |