Heel/Toe Overhang
I recently purchased a Nitro Team 157. The waist width is 25cm, and I wear a size 10 boot. My toe overhang is about 7/8'' and my heel overhang is about 3/4''. I have Burton Custom bindings, and my boots sit relatively high off the board. My stance is ducked at 6 & 15 degrees.
Should I consider shaving a bit off the toe and heel of my boots or am I ok? |
You will be fine. I only see it as a possible issue if your bombing steeps and I would assume you would want or have a wide all mountain board for pow...if you find it to be a issue, try a set of those Palmer power link plates to give you some extra clearance.
|
don't your bindings have gas pedals (raised toe ramps)? If it has any hang, larger pedals may help. size 10 shouldn't be a problem
|
your fine.. i wear an 11.5 and i smash on a normal board. wide stance helps a bit. try to get your boot centered over the board perfectly though, moving the base pates back a bit.
|
Shouldn't be an issue..... I've been shredding with a pair of size 15 boots for years without risers. Just duck em out a bit and don't get the bindings with the fat toe straps
|
All times are GMT -7. The time now is 3:22 AM. |