WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   SS D2 Sizing (http://www.wakeworld.com/forum/showthread.php?t=774299)

eubanks01 02-09-2010 4:06 PM

If I wear a 8.5 running shoe would I be a 8 or 9 in the D2? Hyperlite 8's fit me well.

flexnwake 02-09-2010 4:33 PM

They run pretty close to size. I would recommend running a 9, since your a 8.5. Those intuition liners on the D2's are super nice and can be heat molded to your foot multiple times. So if you feel the boot getting loose on you heat'em up! but they shouldn't, they don't run big.. The Drivers did although...

eubanks01 02-09-2010 5:19 PM

The reason I asked is that I heard they run small. I like really tight bindings so I'm inclined to get the 8's but obviously don't want them to be too small. I'm more like a 7.5 in a dress shoe so who knows.

wakeborder5 02-09-2010 5:59 PM

I would go small. I wear 11.5s and got 11s and hey are snug but I wouldn't want them any other way, they fit perfect.

lseghatch 02-09-2010 6:57 PM

I would say go a size smaller as well. They mention putting a piece of ball'd up paper in the toe, when heat molding, if it's too tight. They supply the ball'd up paper.

canadian_waterboy 02-10-2010 8:16 PM

Get 8s and if they don't fit, i'll trade you for my 9s. I was in a similar situation and i went a size up.... regretting it now.

eubanks01 02-10-2010 8:20 PM

Sounds good. Should be in early next week.

sidekicknicholas 02-11-2010 7:44 AM

I wear a 13 shoe and got 12's.... after you heat mold they become perfect.

eubanks01 02-11-2010 8:00 AM

Good to know Nick. My setup should be here early next week! I hope I like this flex stuff. <img src="http://www.wakeworld.com/MB/Discus/clipart/lol.gif" border=0>

wakebrdr38 02-11-2010 10:05 AM

i would go 9

eubanks01 02-11-2010 10:32 AM

Too late. It has alredy shipped. If the 8's are too small then I'll just trade them in for 9's.

robd 02-12-2010 5:19 AM

yea eubanks i wear 11.5 and i have the size 11 d2s and they fit great. youll be fine

eubanks01 02-16-2010 5:44 PM

Fail. 8's are too small. I hope they have some 9's left!

sidekicknicholas 02-16-2010 5:46 PM

Did you heat mold them?

eubanks01 02-16-2010 5:49 PM

No, I wouldn't think I could exchange them if I did. My toe is definitely against the end of the liner which I don't think is a huge deal, but I'm also pushing up against the end of the actual boot. I think that it would be really uncomfortable to ride like that. <BR> <BR>The 2009 Recoil I got does look sick though! I can't wait to ride it and see what this flex stuff is about.

wakeborder5 02-16-2010 5:59 PM

My foot touches the end of the liners and the boot and could have a tad more room, but surely would not want to go up a full size and lose the snugness. As long as your foot is only touching the end and not pushing on the end you should be gravy

wakebrdr38 02-16-2010 7:42 PM

yeah I called that one! <img src="http://www.wakeworld.com/MB/Discus/clipart/wink.gif" border=0>

wakerider111 02-16-2010 9:29 PM

9s <BR>and if you have extra room, wear socks and or throw a gel orthotic in if you think it is a tad large to squeeze it up

eubanks01 02-17-2010 9:41 AM

So some folks are telling me to heat mold them with something at the end of my toes to stretch them out a bit. It does seem like it's the liner that is too short and not the boot itself. Any thoughts on doing this and if I could really gain a 1/4 inch or so out of them by doing so? What would you use?

tracktor 02-17-2010 11:11 AM

Eubanks, I stuffed newspaper in the toe and molded mine. My toes were hitting pretty bad. Worked well, they were still tight for a few rides but broke in perfect. This was on th PB Floyds but should work the same for the D2's.......

eubanks01 02-17-2010 11:19 AM

Good to know Tracktor. I might go that route. I really hate to hassle with sending these back and then potentially getting some that are too big. As is though they are a no go with the way they rub the end of my toes. <BR> <BR>I know Ronix provides you with something specifically for this purpose. Not sure that Slingshot does the same.

wakeborder5 02-17-2010 11:30 AM

If it's just the liner that's too small, you should be good, my liner always feels small, but it will break in and isn't rigid enough to make a difference

eubanks01 02-19-2010 11:05 AM

Well, turned out to be too small after all. Big props to Slingshot for going ahead and getting me a new pair sent out already. <BR> <BR>So last question...Does the adjustment part of the SS baseplate face to the inside of the boots or the outside?

sidekicknicholas 02-19-2010 11:21 AM

Inside.

eubanks01 02-19-2010 11:52 AM

Thanks Nick. I can't wait to try out my new setup in a couple of weeks! Great customer service so far with SS.

sidekicknicholas 02-19-2010 11:55 AM

They were awesome... I ahven't tried without Kyle there.... good to know it still sounds good.


All times are GMT -7. The time now is 9:01 AM.