Is there any way I can get my depthfinder transponder off of my hull? I Used slow cure epoxy to attach it, and now I want to move it. Thanks
|
You can always remove epoxy with heat. If you can get it hot enough without damageing the hull or the transponder, it will come right off.
|
I used a hammer to remove mine. It is fun anytime you get to hit something with a hammer. The transducer popped right out and the glue stayed. Then I took the new transducer and glued it in the exact same spot.
|
if you didn't prep the hull really good when you put it in, you might be able to lift an edge and peel it back. get a screwdriver under it and twist the screwdriver to lift it up.
|
All times are GMT -7. The time now is 1:10 AM. |