finally got the boat in the water <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327568.jpg" alt="Upload"> <BR>went with the through hull similar to the engines, instead of rivals 1.5" scoop <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327569.jpg" alt="Upload"> <BR>doesn't look great, but no other place to put it <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327570.jpg" alt="Upload"> <BR>put the ball valve in and then plumbed with pvc to the switch
|
have 2 bags in the bow<img src="http://www.wakeworld.com/MB/Discus/messages/65921/327574.jpg" alt="Upload"> <BR>1 one the rear drivers side <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327575.jpg" alt="Upload">
|
then on the passenger side, I went with fly highs quick connect <BR>the hoses roll up and fit in the netting and behind the panel when not in use <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327581.jpg" alt="Upload">
|
in the rear center <BR>I did away with the ice chest <BR>fiberglassed some plywood, and covered it with carpet...making a new floor <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327598.jpg" alt="Upload"> <BR>I was originally going to make a new seat <BR>but decided to creat a hinged door that can hide hoses when not in use <BR>or quick connect 2 fly high bricks when I want ballast <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327599.jpg" alt="Upload"> <BR>the rear area is still a project in motion <BR>I might make a more stable "wall" <BR>also, the switch panel will more than likely be abs plastic..in the future <BR>..I am going to add Malibus fill/drain dash swithches in place of accessory swithes...in the future <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327600.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327601.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/327602.jpg" alt="Upload"> <BR>
|
in the rear center <BR>I did away with the ice chest <BR>fiberglassed some plywood, and covered it with carpet...making a new floor <BR> <BR> <BR>I was originally going to make a new seat <BR>but decided to creat a hinged door that can hide hoses when not in use <BR>or quick connect 2 fly high bricks when I want ballast <BR> <BR>the rear area is still a project in motion <BR>I might make a more stable "wall" <BR>also, the switch panel will more than likely be abs plastic..in the future <BR>..I am going to add Malibus fill/drain dash swithches in place of accessory swithes...in the future <BR> <BR> <BR> <BR>
|
All times are GMT -7. The time now is 8:46 AM. |