how do you get the landing side wake not to wash out when the stock ballast is full so i need more weight in the front

you need to let a little out on the opposite side or add more on the wash out side, it often washes out on the port b/c the drivers weight on the starboard

it always does it like when ur riden the landing side is always washy but the launch wake is clean no mater what side im on so do i need more in the front the roster tail is real big would that do it thnx man

I think it has to do with the pull of the rider, cutting towards the wake (temporarily unbalances the boat). . . my boat does the same thing. I'm surprised to hear it happen behind a big boat, though. At least it is not affecting the wake you are coming off of.

show us a pic if you can

ok i got to back to my vids but ill get one on tonight so hold on a sec

<img src="http://www.wakeworld.com/MB/Discus/messages/65921/398544.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/398545.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/398546.jpg" alt="Upload">

You need more weight up front. That boat being so large should not be washing. Supra's love weight up front. <IMG SRC="http://www.wakeworld.com/MB/Discus/clipart/happy.gif" ALT=":-)" BORDER=0>

Get the 1000lb bag for the front. Works like a charm.

In the 2nd pic it looks like your boat is way off balance? Just throw some people up front when you go next time and see if that helps

alright ill give that a try thanks

The wake looks super lippy, more weight in the front or put the plate down further. <BR> <BR>(Message edited by ralph on December 23, 2006)