stereo replacement suggestions 06 MC X2
Hi guys, have lurked here for a while and thought I would ask some opinions.
I have a 2006 X2 with the standard Clarion CMDA4 (I think?) and I want to replace it. I wanted to know if anyone had any suggestions for a good replacement that can still have the amp plugged in, has an IPOD hookup etc. Thanks in advance!! Jake |
I'm no expert, but it's my understanding that Clarion is real good. Why do you want to replace it?
What about a newer model Clarion? That being said, I just put in a whole new system and put in an Alpine Deck, this one http://alpine-usa.com/product/view/ida-x100m I heard that alpine was awesome and the x100 is super ipod compatible. I don't even have my boat back from installation to review it, but I'm guessing "sickness!" lol |
Why spend the money on a deck when you can get an Ipod adapter that lets you use the thumbwheel. Spend your money on a better stereo accessory
|
I have the ipod cable already...the stereo is F'd up and not recognizing the cable. The stereo is super basic, just looking for suggestions on a new head unit.
Thanks all, Jake |
If you have clarion remotes by the drivers seat or back of the boat and you change the head unit your remotes will no longer work. so you'll have to change out those as well and those run about $150 each check ebay though you can get them much cheaper. however also be careful on size alot of them won't mount up and will need some custom work to make them fit
|
I just installed the Sony cdx-M60ui. I love it! You can access the iPod from the deck and there is also a mode allowing you to run the music from the iPod.
|
William, good lookin out on the remote controls...I did not even think of that!
I think I will just grab up another one of these units and replace my malfunctioning one. Jake |
IMO, Alpine makes the best HU's. I had the stock kenwood unit in my supra and by swaping over to the Alpine, everything sounded much better even after removing two eq's. Part is due to the higer RCA output voltage of the unit vs the measly output on most marine units.
|
Jake,
Not a problem bro. Just make sure you get the remotes that match up to your new deck. it will say right on the box of the remote what deck's by that brand that they work for so if your going to stay with clarion deck's just make sure that you get the model number of your remote(s) and google that model number for the spec sheet of what deck's they work with . That's the issue i had and am now fixing it so sometime you have to learn the hard way so just make sure you get all the stuff right away. Good Luck |
Both of these decks should work with your remotes ...
I would have already upgraded to a different head unit if I didn't have three of the wired remotes and one wireless remote. I was looking at the CMD5 a few months back looks like they've burned through a lot of the refurbed inventory since then.
Both of these are refurbs ... CMD4A http://cgi.ebay.com/ws/eBayISAPI.dll...m=280403835672 CMD5 http://cgi.ebay.com/ws/eBayISAPI.dll...m=380175934747 |
Cmd6
I just got the new CMD6. I got it because you dont need to have an iPod adapter. It has a usb plug built into it. For me it was worth it. Now I dont have to mess with anything else. I am just going to put an old iPod into the glove box (where the unit is mounted).
I got it for 199.99 as a factory refurb. They still have 4 left http://cgi.ebay.com/CLARION-MARINE-C...item563a521e84 Got it opened up today and it looks perfect. Shipping was quick and via ups. |
Quote:
It would be nice to have a unit that plays MP3 discs. I always seem to be coming back to the same 50 songs I always play...I guess I get no credit for creativity. |
The OP's current remotes will not work with the CMD6, I dont think.
The Clarion CCA-Ipod will work with your current CMD4A, and works with most Ipods. The CMD4a has AUX RCA's which allow any MP3 with a headphone jack. Not as good a quality signal, but then again, you're not limited to one brand MP3. The current remote will work with the CMD5. |
Ok, so to clarify....I can go with either the CMD4 or CMD5 and all of my remotes on the boat will work fine..plug and play right?
Thanks, Jake |
All times are GMT -7. The time now is 12:14 AM. |