Hi guys and gals- Need some fins for my new board. Said to need 2- 4 1/2" fins that will work with drop in fin boxes, any suggestions? I tried to look up their website (tritonsports.com) with no luck. Thanks for any help. See ya.
|
Never heard of a drop in fin box. The last time I looked at a churn I swear they were Future Air's. <BR> <BR>Does the box have a single set screw at the front of the box inline with the slot for the fin base and the back of the box will look like it has a "dowel" running perpendicular to the length of the box that the fin base hooks into? If that is the case, just check for Future's fins online.
|
I looks to me that the fins have a single set screw (like a 1/4-20) right in the center of the fin. The screw/bolt comes from the top through the board and then into the fin.... does that make sense? If not, I will take a pic if you think you might know where to find some. Thanks a ton, seriously, thanks. RYan P.S. Ever rode that model, I think it is a 2005? <BR>
|
Yeah, shoot me a picture if you can. The 1/4-20 isn't a Future Air. It sounds like the LF side cupped fins attachment almost.
|
DUH! Sorry R.D. that has to be REDX. Let me find their website. <BR> <BR><a href="http://www.redxfins.com" target="_blank">www.redxfins.com</a> <BR> <BR>Go to the system page and see if that looks like the way your fins are set up. <BR> <BR>
|
Thanks bro- those look like the ones...now just to get a pair. Thanks again. RD
|
I have been hunting for the same fins for my butter board and havent had any luck. The redx fins didn't fit. What fins worked for yours?
|
All times are GMT -7. The time now is 4:04 AM. |