Looking to get another prop like the stock on just as a spare. Where is a good place to order one. 2003 san 210 <BR> <BR>also how do you get it off. Got off the carter pin and the nut but the prop dosn't want to come off the key. <BR> <BR>thanks

You need a prop puller. <BR> <BR>Try Delta Prop. They give a discount for planetnautique members. Check the 'group buy' section on planetnautique.com for the coupon code.

I'm running the ACME 644. Lost a touch of top end, but not a big deal. I run about 1000# over stock ballast. <BR> <BR>I bought mine from Wakeside, but I noticed they raised there price ($412). Look for Karl De Loof on WW (not sure if that's the right spelling), he will hook you up.

Karl De Looff <BR> <BR><a href="http://www.boarditup.com" target="_blank">www.boarditup.com</a>

I run the 856 acme on mine also from wakeside

what size do you use.... 13.5 x 16 x 1 1/8th? That is what is on it now

I run a 644 on mine as well. Lost some top in but it is a rabbit out of the whole. It is much nicer when running heavy and the PP is better. <BR> <BR>Get a prop puller and lay out a towel or blanket to protect the prop when it comes off because it will do so quickly once you get it loose.

Make sure you get one that spins the correct direction!! They changed in '06! It looks like you have an '03.

yeah i do have an 03. How do i know which way it spins and any good sites to get one from? I need to order it asap i need it by thursday

'03 will have RH rotation. Go to this link to see the differences: <BR> <BR><a href="http://www.wakeside.com/page/W/CTGY/nautique_v_drive_propellers" target="_blank">http://www.wakeside.com/page/W/CTGY/nautique_v_drive_propellers</a>