So I have an older X-star with a Zero Flex Tower on it. I am going to be putting a new tower on it with a month or so (if any tower manufactures are reading this need another team rider I am all yours!!!! PM me). At any rate, this tower is cracking along the cross supports pretty bad and is really starting to sketch me out. I took it to a metal fab shop and they told me they could weld a "boot" over the crack to stiffen up the tower until I can get a new tower installed. What they need to know is exactly what type of aluminum the tower is made out of. Does anyone have any clue where I can find this information?? I emailed Mastercraft and called my local deal so far without much luck Mastercraft has not responded yet and my local deal is clueless. Any help would be much appreciated.
|
Is the zero flex made by new dimension? I can't remember off the top of my head. Could call the tower manufacturer as well.
|
Here is what you're lookging for as far as new tower that is "stock" <BR> <BR><a href="http://www.newdimensiontowers.com/galleries/mastercraft/1999-2000_Prostar_205.html" target="_blank">http://www.newdimensiontowers.com/galleries/mastercraft/1999-2000_Prostar_205.html</a> <BR> <BR>and the material looks to be (at least on the the new dimensions tower) -- anodized 6061 aluminum tubing
|
my guess is that andy has the older zero flex tower which is known to crack where he is talking about. <BR> <BR>I had the tower welded on both sides of my 00' xstar, but they did not add a boot, just welded the crack into a new big beefy fat weld. <BR> <BR>The tower never had a problem after that.
|
Dj is right I old tower. I am just trying to limp by until I can get a new tower installed or better yet just upgrade to a pickle fork in the next month or so. I still have no response from Mastercraft as to what type of aluminum is used in the tower. <BR> <BR>Nick I think you nailed the type of aluminum needed to repair the tower.
|
Call Chad Long at New Dimension. He should be able to confirm the material but it should be 6061 T6 like Nick said. I thought they were supplying those towers back then.
|
The aluminum is a 6463. Tell your welder it welds similar to 6061 with one big catch...it's anodized. So tell him to run hot. <BR> <BR>It won't be a pretty weld unless they have experience welding anodized stuff. Good luck.
|
All times are GMT -7. The time now is 6:37 PM. |