Drain plug standard sizing?
Are inboard rear drain plugs standardized? It appears some fisherman down at the marina stole ours. Im hoping I can find one at a Marina or Lowes since Im about to go out to the lake.
Thanks |
Mine is the same as my 1980 boat was and I could get it anywhere.
|
1/2" is the standard drain plug size.
|
I think there are two sizes. I know I have had boats that the standard plug does not fit. I want to say that MC or Malibu use something different, but I might be wrong on that so don't quote me. I would call your dealer.
|
My '06 Moomba and my '10 Malibu LSV both had/have stamped "1/2" NPT plugs. I have mine permanently attached now. I drilled a hole in the plug, soldered in a 6" piece of coated solid copper electrical wire and soldered on an eye ring onto the other end. I put it through the hull and secure it with a key ring loop into the eye ring to keep the "honest people honest". Pull it out and it hangs w/o any flopping around or banging on the hull.
|
MB uses a bigger plug. 3/4"?
|
Turns out it was indeed the 1/2 inch. Thanks
|
How do you know it was a fisherman?
More obvious follow-up rhetorical questions held. Glad you have a drain plug now. |
All times are GMT -7. The time now is 7:56 AM. |