Input on redoing my system
I'm finally getting around to redoing my stock supra system but on a budget.
What I have now- Amp Kenwood KAC-8402 Sub Kenwood Excelon KFC-xw12 (doesn't have a box yet you'll have to ask supra why) Inboats 6 factory Kenwood 6.5 Tower Roswell sound bar (sold) Now REV-10's :D My plan is to add perko (boat doesn't have one) and already have a group 27 to go in the boat with the starting battery might even add a second group 27 but I don't float with it blaring for long periods of time so I'm not sure if I even need a second. New amps PPI 900.4 to run the REV 10's PPI P1000.1 to run the sub Keep the KAC-8402 to run the six inboats. I'm guessing I'll run 1 gauge to a distro block and then 4 gauge to the amps. See any problems or have better budgeted idea's or any thing I need to look out for when wiring up the amps. |
I say a second battery is a MUST. If you ever do sit just a little to long and it doesn't start.....your floating!! Not like needing a jump in a car. I'm not a stereo guru but I see 1900 watts there on your amps, thats a fair amount if I read that right. To run that and all the boats systems seems like alot to me. Second battery would be my fist addition. Can be done for less than $100 plus a good battery.
|
Sorry when I said a second battery I meant a second group 27. I already have a starting battery and also bought a deep cycle group 27 to add but I could make it a three battery system if I need it.
|
I have some Wet Sounds pro80, and a Syn4 for sale in the classifieds! The Wet Sounds amp will not use as much battery power either.
|
If you ever decide to upgrade the Kenwood amp and 6.5 inboats, drop me a line.
|
I would suggest a WS 420 EQ also. I have one laying around so if your interested let me know.
|
All times are GMT -7. The time now is 12:33 AM. |