hey guys my buddy has a pair of hyperlite spins and the overlays ripped. Anyways he got new overlays and changed them up but he doesn't know how to change the string.. <BR> <BR>What's the trick from disconnecting the string without cutting it? He needs to transfer the string from the old overlays to the new ones.. Sorry if the solution is obvious but i have yet to see the bindings and am going only by his description.. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/179350.jpg" alt="binding pic">
|
Needle nose pliers and the very tip of the plastic thingy will pop off. (That's how my Byerly's are at least). It should be the same.
|
My splits are the same kinda of thing. I haven't taken it off yet but it looks like it should.
|
yes, I've replaced mine recently. Needle nose pliers are the solution as Blabelmooch said. I had to use two pair- one to grab the very tip and the other to hold the main section. Pull the tip straight out, don't twist or bend it.
|
All times are GMT -7. The time now is 5:03 PM. |