ok just bought me a pair of new ronix one boots in size 11. i wear a size 11 in my work boots and all of my other shoes and so on. my toes are touching the ends just a hair. i was told i can heat mold them and it will help out alot. can any one tell me if thats the way theirs fit or did they get a bigger size or how to heat mold them to make a little more room. its not painful when i put them on but just a little cramped. do they just need to be broke in or what.. thanks in advance

Just mold them. That should take care of that. Your local pro shop should have the heater.

also, after a while the padding will give way and they will fit better.

so can anyone tell me what size shoe the wear in relation to what size binding thery are wearing in the ronix ones.. thanks in advance

They definitely need to be snug. A closed toe binding that is too big just doesn't work well. Molding will help.

have the dealer put a double toe cap on your foot when you heat mold them and that should work. i wear a size 8.5 shoe normally and my 9's fit great.

ok cool i wear a 11 to a 11 and a half and ordered size 11 and my toes feel a bit cramped. i just need to find a pro shop around here that molds them.

after you break them in (about 3 rides) theyll be fine...i wear a 10.5 and i ride the size 10s. my toes were a little cramped at first after a few sets at the owc cable they fit perfectly. all the heat molding does is simulate the breaking in.

thats what i was waiting to hear.. thanks guys..

Just got this bindings 10 days ago and I can tell you that after 3 rides they feel much better than the 1 ride. I dont think I'll be heating them for a while.