Going with some buddies to rip the flowriders tomorrow. Has anyone ever tried a wakeskate at the flowrider? I was going to bring one with me but figured I would ask first so I dont look like a idiot if I show up with it.
|
They won't let you - you have to sign an insurance wavier to ride it, and bringing your own board would breach that policy.
|
But will it work? That is the question. I have been there before and we have and in with the people who run the joint.
|
So just how rich do you think I'd have to be to have my own private Flowrider? Hmmmm. <img src="http://www.wakeworld.com/MB/Discus/clipart/proud.gif" border=0>
|
I heard that the base cost of one is just under $1 Million.....
|
Flowrider = A $H|T LOAD OF $$$$$$
|
In terms of physics, I am 90% sure you could do it. You might not even need to attach a rope to the bottom. You might not be able to carve super hard (I am not sure how much water flows over one of those things), and falling would probably suck a little more than falling into a lake/river/pool etc., but it would be doable.
|
I think it would work but it would be a lot worse than the boards they provide... any sort of reg/molded fin I think would hang up in a second.... maybe like an old Cassette one would be okay.... but turnig would be terrible since the ends are sooooo blunt and square, you need the curve of the tail to get it to track
|
good point nick.
|
Watch out for the board when you fall off and get kicked back up to the top of it.
|
i dont think it will work. there is too much rocker in a wakeskate. also the flowrider boards have an assymetrical rocker similar to a skim board were the tail is almost flat so it is fast enough. the flowrider boards are also narrow and taper quite a bit at the tips so you can go edge to edge the flex also helps. a wakeskate would be really hard to edge on a flowrider because the width would not allow it to roll over. <BR> <BR>just use the flowrider boards they are so uch fun and they dont limit you. but the first hour will definitely kick your butt. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/676899.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65919/676900.jpg" alt="Upload">
|
it's exactly 800,000 for a flowrider after install. However you still have to have a foundation, a building, the water bill and electrical. Average total cost before operating expensense is 1 million. Just incase you were interested. i looked into it once and realized there was no way i was getting one EVER
|
there is a kid at the flow rider here that is sponsored by them and he wakeskates it all the time
|
Nintzel?!?! When are you going? I haven't ridden that thing in over a year. SOO much fun though. Whatever you do though, if you fall and find yourself still standing DO NOT, I repeat DO NOT try to run forward towards the jets. You will find your self flat on your face and popping your shoulder in and out of its socket and out of riding for a few weeks. Worst part is that it was two days before I headed up north for that Push Process shoot. Holding a camera up was a chore!
|
not wakeskating but still pretty damn cool and crazy. <BR><a href="http://www.youtube.com/watch?v=tcfu_l2isWM&feature=related" target="_blank">http://www.youtube.com/watch?v=tcfu_l2isWM&feature=related</a>
|
Yo Taylor we are rolling out tomorrow I will call you about roll!
|
I have seen modified wakeskates on the flowrider, all bottom edges rounded and no fins, with a smooth flat bottom. They probably work better than the company board made for the flowrider. They best boards to ride are the hand made fiberglass boards that they make up in the wisconsin dells, they also use the hand made fiberglass boards at kalihari in sandusky,oh.
|
All times are GMT -7. The time now is 10:35 AM. |