WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   amp for 4 pro 80s settings ???? (http://www.wakeworld.com/forum/showthread.php?t=793032)

WakeDirt 04-26-2012 11:43 PM

amp for 4 pro 80s settings ????
I have this amp, what settings should I have it at? For 4 pro 80s

I have another 2 channel 600 watt arc being repaired (bad switches?) has power and all fuses are good, fan is on but no noise!

any Arc audio fellas/gurus out there?

shawndoggy 04-27-2012 6:49 AM

that's a four channel amp. You can run one pro80 to each channel for a weaksauce 80w per speaker, or you can bridge the amp to a single pair for 320w per speaker (good).

That amp will not power four pro80s well.

murphy_smith 04-27-2012 12:54 PM

A wetsounds SYN 2 will power these just fine and it will be louder than most. I ran the 4 pro 80's and the Syn 2 for several years and loved it!

All times are GMT -7. The time now is 4:59 AM.