hey guys, i was hoping to have our tower put on by now for our big trip to the lake next week, but things have been busy and me and my dad havent had time to choose and have it installed. for now we are stuck with our extended pylon that we built a few years ago. we are raising it a few mor inches, but i want to make some board racks for it to hold at least 2, probably 4 boards. we've got a full shop so we could make most any design i think. just need some pics for ideas, thanks <BR> <BR> <BR>also, if the boards are near the top of the pole like they must to clear the bimini, do they get in the way of the tow line? thanks

Here is a picture of the board rack I have. Yes if you have the bimini (in my boat) you are limited to 2 boards. Yes the rope does sometimes get caught unless you use the extender (shown also) <BR> <BR><a href="http://www.barefootinternational.com/pylon__accessories.htm" target="_blank">http://www.barefootinternational.com/pylon__accessories.htm</a> <BR> <BR>

awesome thanks, i have the general design idea, just kinda needed some mounting thoughts.

This is my skylon rack. Maybe it gives an idea or two. <BR> <BR>The rope sometimes goes get caught with the rack at this height. But I bought a $15 shock tube from overton's and put it on the rope right where it attaches to the pylon. That helped a good bit. <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/65921/73718.jpg" alt="">