WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakesurfing (http://www.wakeworld.com/forum/forumdisplay.php?f=87668)
-   -   TISurfing a 21 XTI (http://www.wakeworld.com/forum/showthread.php?t=335595)

malibuboyz 06-14-2006 1:50 AM

Hey was in need of some help, have only recently bought a Hyperlite Broadcast, and we ride behind a Wakesetter 21XTI, was wondering if anyone has any experience surfing behind a XTI, where did you weight it? and does anyone drive in circles when surfing or just straight? we can only manage to basically stand there because when we try to cut etc we sink. any advice would be much appreciated cheers

ord27 06-14-2006 7:28 PM

John <BR>we have a 2005 21xti <BR>goofy side....factory ski locker bag full <BR> 450lbs under rear seat (drivers side of <BR> boat) <BR> another 450 lbs on top of same seat <BR> fat brick..175lbs..on floor as far back and to drivers side as possible <BR> wedge down <BR> 1 adult..2 kids <BR> 9.8 mph <BR> <BR>regular side <BR> factory ski locker bag full <BR> fat brick on small seat in rear <BR> 500 lbs along port side isle <BR> another 400 lbs or so on top of the 1st <BR> isle bag <BR> wedge down <BR>1 adult 2 kids <BR>9.8 mph <BR> <BR>I just ordered a big fly high fatsac to replace the 2 bags I stack on the port floor <BR> <BR>have gone out with 9 people...but had more trouble finding the wake that didn't roll over right at the boat <BR> <BR>I also have 500 lbs in the bow, but hadn't had any luck when using them <BR> <BR>I put the Rival ballast system in and have everything automated...the rear and port hoses have quick connects...when I'm not using them, I roll the hoses up and stash them in the netting <BR>oh <BR>I akso removed the icechest <BR>created a new floor and back wall <BR>gives me more space for sacs and hose stashing

malibuboyz 06-19-2006 12:53 AM

hey cliff thanks heaps for the help, that sounds amazing you wouldnt have a pick would you? so did you say you had factory ballast in the rear or were you reffering to the system you put in?? thanks

ord27 06-19-2006 7:14 AM

no factory ballast in the rear <BR>can't go under the floor on an XTi <BR>check out this website.. <BR><a href="http://www.rivalindustries.com/Main.htm" target="_blank">http://www.rivalindustries.com/Main.htm</a> <BR>it's the system that I put in... <BR>good luck <BR>I'll post pictures this weekend


All times are GMT -7. The time now is 11:41 AM.