Ok I did my first tube shot the other day and I was having all sorts of problems with water on the lens housing (obviously) I was just wondering if there is anything to put on it to make it not stay on the housing and bead off without ruining image quality?
|
If you can't get a squeegee on it try spiting on it then re-wet and the water will sheen off.
|
Get a squeegee. Like $3.00 at walgreens
|
I don't think the squeegee will work on a EWA bag.<img src="http://www.wakeworld.com/MB/Discus/clipart/sad.gif" border=0>
|
you could get a squeegee on the lens port, couldn't you? <BR> <BR>also, apply rain-x on the lens port each time before you go out.
|
The lens port on a EWA bag has a outer ring around it so you can't swipe it with a squeegee.
|
you can get mini squeegees.
|
It wouldn't matter because you can't push the water past the outer ring.
|
ah, gotcha!
|
ya i thought about the squeegee i'll have to pick one up and i'll give rain x a try too. <BR>It is an EWA bag, worked ok for the price anyways. camera was dry so thats the good part.
|
Has anyone tried to put rain-x on an Epic video camera housing? If so, how well did it work?
|
All times are GMT -7. The time now is 12:54 PM. |