My New Supreme v226!
 

Well the time has come to retire the current boat and I have my demo v226 on order - it will be at the Westcoast Open (along with some others I'm sure) if anybody wants to shred!

After 100's of hours in them I cannot wait to have one to call my own (for a little while that is - it will be for sale mid summer!).

Custom all flake gel coat, Indmar 358, custom dipped Bullet HP770's and racks, JL Audio / Wetsounds interior sound, heater package, transom LED's, LED docking lights, tinted windshield, custom PNP 3200+ lbs of ballast, Surf Series exhaust, and racks full of boards!!!!!!!!!

Can't wait - I just had to share!

Sweet boat... post pics when you get it. CONGRATS!

That's one good lookin' boat you got on order. I like the color schemes. Congrats on your purchase!

What is the surf series exhaust?

Down turned exhaust pipes.

TQ we will see you at the WCO save a tow for me. Love the colors cant wait to see it in person

You know it H! You know us we won't be hard to miss . . . . . . . I've got a Falcon here to sell - very similar to yours ;)

Did H finally trade in his boat ?? if so what did he get??

My lips are sealed ;) I didn't say it was his Falcon . . . . . . . . . . . . . . . . . . . I didn't say it wasn't either ;)

still like the supreme over the centurion. Maybe after I see your new demo you might have another falcon for sale

H didn't trade his in, I'm just selling it for him while his new boat is being built. I have three more two2six's being built now as well and my demo will be avl to purchase this August.

Yeah i talked to him keep me posted how the sell goes

She's getting sprayed next week . . . . . . . I've got about 3K lbs worth of bags here I'm plumbing in, 4 HP 770s sitting here, and a new board from Stretch being built as we speak . . . . . . Anybody have a time machine?

Can't wait to see it! I rock 4 Bullet HP 770's on my V226, definitely louder than any other boat on the lake up here in VT! Are you keeping the stock tanks in or did you tell Supreme to pull them so you can go with custom Enzo sacks? I have an 1100 lb Flyhigh sack plumbed to an additional Jabsco ballast puppy and 400 lbs sacks (50 lbs each) of lead from Lead Wake that allow me to move them around depending on how many riders/passengers on board? Pulling mine out of storage this weekend, hope to be in the lake next weekend!

We do a PNP kit all the time in the two2six. We keep the stock tank and add 1100's on top of them with a valve to switch from port to starboard (based off of the 2013 Enzo PNP Surf Ballast). Mine will have another pair of Pro bags under the port and starboard gunnel seats adding about another 400-500 lbs per side - I should be right at 4500 lbs of ballast when its all done!

I love the HP 770's paired with the JL MHD 600/4 - hard to beat them.

Coming together - hopefully a break in run next weekend!

Sick dude

:D

Lookin' good TQ!

Next Week! NOw to schedule the Demo's - Let me know - She'll be avl at the WCO!

:D

:D

:D

I love it without the surf series stickers I would have them shipped lose and just get the supreme logo on the side. Tony and I would love a set behind it see you at the WCO

man, that's a deep V!

The Surf Series decals will be on it, but they are going to be in white . . . clean and subtle. Its going to be a struggle to get all of the ballast in before the WCO, but I'm hoping I can make the time - fingers crossed - either way I cannot wait! I am working on some demo days too, just can't decide where . . . . too many local lakes . . . . . Mendo, Sonoma, Berryessa are all very close - it will always be on the water on Clearlake - going to be a great season!

Mendos looking too low already, ill be at sonoma more this summer messing up djjames' water ha ha

Ya I know - crazy, like always though they will drain Pills and try it keep some water in it. You need to be over Sonoma and come this way - closer and better water! Any hits on the MB?

:D

Today is the day!

Where's the finished product shots?????

cant wait to see it in person at the WCO!

Fu**ing SICK whip!!

Just slammed busy at the store, its better looking than I ever could have imagined, and highly doubt photos will give her justice! Splashed her for just a few minutes to check everything, but with 40 MPH winds for the past few days and then rain yesterday and today hard to get good photos . . . . All of the ballast parts should be here today so maybe a good time for that project while the weather clears up. Off the subject a little, but my custom Stretch Board should be showing up this week too!

sick board! You gunna have a stereo in that thing at the WCO?

I hope too, but I am also trying to get all of the ballast plumbed in as well - plus getting the hauler ready and baby stuff, etc, so we will see what all gets done - it might show up in stock form with some bags and a tsunami if I run out of time, which its looking like that might be the case.

Long delay with the weather and work :mad:

I'm going to try and start all of the custom ballast today, hopefully stereo system 1st part of next week and then off to the WCO! Now all I have to do is figure out how to get my boards from Stretch in Santa Cruz up to the Northbay by the 1st of the week as they are being finished up today . . . . . . . . .

:D

:D

That color combo is SO SICK! Never been a fan of the Surf Series graphics... but this is AWESOME!

Tried my best to keep is subtle with the white decals, in passing you barely notice the Surf or Series - I love it!!!

sick!!!

Looks great.

Well I was at the shop till about 10:00 last night and have the ballast system about 90% done, hopefully have a little time to wrap it up today. This is what I got to look at this morning on my super long 8 mile commute to work - can't wait for tomorrow!!!!!

I'll be at mendo tomorrow on the blue supreme, did you just go with a 1100 in the corner?

I'm splashing the glass you see above tomorrow am - I did 1100's in both rear lockers and a 450 under the port side seat on its own pump. I should be close to 2K lbs on the port side, plus the center tank.

A couple on the water, the custom ballast system, and my 9 month old driving a boat for the first time!

The wave with just the three of us in the boat and all of the ballast under the seat :D

Teaching my little surfer girl how to flag :)

Good looking set up. Congrats!

Great looking wake there. Those v226s are great looking boats.

I really did the 226 wave, might be my favorite I have ever ridden maybe I can poach a ride at the WCO..

Thanks - I love it!

Ya Ben that's what the boat is for, come look me up we will be there some time on Thursday . . .

Look at this one that just showed up! Bad pics, but all of the gun metal in the hull if flake!

T that's the one I want best looking 226 I have ever seen

That boat would look so sick behind your Cummins!

Hey TQ... sent you a PM...

Very nice. Where did you have the wakeplate in those pics?

im guessing 50-75%? Way sick trav!!!

Just what Kelley said on the tab - thanks bro!

My demo v226 (white and silver flake) is on the market! Somebody is going to score on it!!! Sold as new, under 15 hours on it!!!

How much?

PM sent

have a ballpark figure on what your asking??