I have a perko switch selecting what battery i want to use. my problem is on the preko switch under it i cant fit every wire that needs to be hot.I want to be able to have the light on my tower be able to be use on any battery.Do they make some thing to turn the four extra wires into one to go to the perko switch.I have wire form stater going there as well. plesase help

Hook the extra wires at the starter.

Purchase a distribution block and get as many of the wires on the disti block as you can, this should free up more then enough room behind the perko.

these both sound like great ideas but going back to the starter is just more work.now going with a distibution block sounds good but where do i found one at.thank for the comments.

<a href="http://www.waytekwire.com" target="_blank">www.waytekwire.com</a> has remote battery posts. Run a cable from the C terminal of the switch to the remote post and attach all the extras to the remote post.